The Widebay16 is a remote optic intended for use with POD style LED high bay and low bay sources. Unlike traditional reflectors, the WB16 is shallow so as to allow higher beam angles. Its large upper shroud flat top allows it to be easily adapted to most any fixture without the need for expensive collars. The lower lens is shaped to distribute light with wide bat-wing pattern, allowing for greater vertical illumination.
High bay and low bay applications where a modern fixture appearance, brightness control and/or wide distribution are desirable. Before final installation of Reflexors, dissipate static on parts by spraying with de-staticized air or by wiping with a clean damp rag. This will help minimize dust build up on the Reflexor.
Lumieo and Frost available in open or closed top
White Acetal latches
Clear polycarbonate latches
Silicone lens gasket
Metal lens retention clip
The large upper shroud flat top allows it to be easily adapted to most any fixture without the need for expensive collars. Shroud is adaptable to any LED POD with an opening of up to 12.55 inches. Lumieo® upper shroud allows for greater up-light. Available in Lumieo® Acrylic and Polycarbonate Frost.
Part No.: 811465
16” lower diameter lens to be used primarily for low bay applications where brightness control is paramount. Lower lens also enhance uplight and vertical illumintation. The 16” lens can also be used as a drop lens option on 816 and S16 Reflexors®. 16” lens provides a 1.75 to 2.00 spacing criterion (depending on POD LED board layout). It is available in LED Grade Acrylic, Lumieo® Acrylic, Acrylic Moon Glow™ and Polycarbonate Clear.
Part No.: 811450
There are three pieces to each latch; the main hook, the minor hook, and the hook connector. The latch will come assembled from our warehouse. Latches are available in White and clear.
Part No.: 209381
Silicone gasket for lens perimeter. The enclosure is IP66 rated.
Part No.: 209366