lighting products

Platform II WideBay16

This multi-purpose LED fixture kit provides a Type V distribution with a main beam of 50 degrees vertical. This combination is suited for intersection, parking garage, low-bay and other general lighting applications. The LEDs are mounted 4-12” away from the optical surface which provides excellent hiding power.

  • Platform II Casting Dimensions

  • Platform II with Widebay16 Exploded View

Applications

This combination is suited for intersection, parking garage, low-bay and other general lighting applications.

Features

  • This one-piece casting design can effectively dissipate up to 100W in a 40ºC ambient temperature with an appropriate LED module.
  • The cast aluminum heat sink is offered either raw or powder coated white. To achieve a wide, Parking Garage distribution, there are 12 internal LED board mounting surfaces which are canted 35 degrees from vertical.
  • A new board mounting feature allows a variety of different board shapes and sizes without the need for any drilling or tapping. Boards may effectively be mounted on 4, 6, 8, 9 or 12 faces.
  • WB16 is shallow so as to allow higher beam angles.
  • Large upper shroud flat top allows it to be easily adapted to most any fixture without the need for expensive collars.
  • The lower lens is shaped to distribute light with wide bat-wing pattern, allowing for greater vertical illumination.
  • Suitable light engines are 100W or less, not including driver.

Approvals and Listings

  • ETL Listed to UL1598 and 8750; file sharing program available to all customers
  • IP66 Rated
  • NSF International certified for NSF/ANSI Standard 2 – Food Equipment

Specifications

Dimensions
8.95” high
16” diameter

Lens Materials
Acrylic:
Clear
Lumieo™
Moon Glow™
Polycarbonate:
Clear

Shroud Materials
Acrylic:
Lumieo
Polycarbonate:
Frost

Accessories/Options
Mounting Hook
Clear polycarbonate latches
White polycarbonate latches
Silicone lens gasket

Photometry

Description PDF
Platform II with Lumieo Wide Bay Shroud and A/C Clear Lens with Lynk Labs 152 LED Module 05989
Platform II with Lumieo Wide Bay Shroud and A/C Clear Lens with Lynk Labs 152 LED Module 05990

Components

Cast Aluminum Heat Sink

This one-piece casting design can effectively dissipate up to 100W in a 40ºC ambient temperature with an appropriate LED module. The cast aluminum heat sink is offered either raw or powder coated white. There are two suggested LED Board mounting options. To achieve a wide, Parking Garage distribution, an LED board may be mounted to the horizontal inside top surface.

To achieve a wide, Parking Garage distribution, there are 12 internal LED board mounting surfaces which are canted 35 degrees from vertical. A new board mounting feature allows a variety of different board shapes and sizes without the need for any drilling or tapping. Boards may effectively be mounted on 4, 6, 8, 9 or 12 faces.

Part No.: 209371

Widebay Shroud

The large upper shroud flat top allows it to be easily adapted to most any fixture without the need for expensive collars. Shroud is adaptable to any LED POD with an opening of up to 12.55 inches. Interface® upper shroud yields high light efficiency and a gentle glow for maximum brightness control. Lumieo® upper shroud allows for greater up-light. Available in Interface Acrylic, Lumieo® Acrylic and Polycarbonate Frost.

Part No.: 811464

View Choices

Widebay16 Reflexor

16” lower diameter lens to be used primarily for low bay applications where brightness control is paramount. Lower lens also enhance uplight and vertical illumintation. The 16” lens can also be used as a drop lens option on 816 and S16 Reflexors®. 16” lens provides a 1.75 to 2.00 spacing criterion (depending on POD LED board layout). It is available in LED Grade Acrylic, Lumieo® Acrylic, Acrylic Moon Glow™ and Polycarbonate Clear.

Part No.: 811450

View Choices

Latches

There are three pieces to each latch; the main hook, the minor hook, and the hook connector. The latch will come assembled from our warehouse. Latches are available in White and clear.

Part No.: LSNG-PC

View Choices

Silicone Gasket

Silicone gasket for lens perimeter. The enclosure is IP66 rated.

Part No.: 209346