lighting products


EFP 42GSACTD Emergency Fluorescent Power Pack works in conjuction with an AC ballast to convert new or existing fluorescent fixtures into unobtrusive emergency lighting. They maintain illumination of one lamp in the emergency mode for a minimum of 90 minutes.


Emergency fluorescent power pack for fluorescent fixture applications.

When battery packs are remotely mounted, the remote distance cannot exceed 1/2 of the distance from ballast to lamp specified by the A.C. ballast manufacturer. The maximum allowable remote mounting distance is 50 feet.


  • Provides a minimum of 90 minutes of emergency illumination
  • Can be installed inside, on top of the fixture or remotely mounted
  • Can be used in both switched and unswitched fixtures
  • Includes low voltage LED combo switch and push to test switch plate
  • Provides a maximum initial lumen output of 750 lumens.

Approval and Listings

  • UL 924 listed for damp location
  • UL listed for retrofit/field installation
  • Life safety NFPA 101
  • UL Listed for damp locations (0°C – 50°C).


Painted white steel housing with 2’ conduit on two ends.

Operates one or two T5, T5HO, T8, T12, Circular T9, U-bend T8/T12, 4-Pin CFL and Long CFL lamps in emergency mode.


  • Dual voltage input 120V/277 VAC, 60Hz
  • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing.
  • 3.6V long life, maintenance-free, rechargeable sealed NiCd battery.
  • Internal solid-state transfer switch automatically connects the internal battery to fluorescent lamp for minimum 90-minute emergency illumination.
  • Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours.
  • Time delay enhancement to overcome end-of-life circuit protection.