lighting products

EBP LEDCP Constant-Power Emergency LED Driver

EBP LEDCP provides constant power output to the load during emergency mode operation. They maintain illumination in the emergency mode for a minimum of 90 minutes.

  • EBP Case Dimensions

Applications

Constant-Power Emergency LED Driver for use in LED applications.

Features

  • 90 Minute minimum emergency operating time over full temperature range (other run times available upon request)
  • Can be installed inside, on top of the fixture or remotely mounted
  • Can be operated as NORMALLY-ON, NORMALLY-OFF or SWITCHED LOAD
  • LED illuminated and remote mounted test switch

Approvals and Listing

  • UL Classified for factory or field installation
  • Suitable for damp locations (0°C – 50°C)
  • 5 year warranty on all electronics and housing
  • Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA
  • Local and State codes

Specifications

Housing
Injection-molded, engineering grade, 5VA flame retardant, high-impact resistant, thermoplastic in a black finish.

LED light source
Lumen output based on LED light source having efficacy of 160 lumens/watt.
Actual output may vary depending on light source utilized.
Provides regulated power from 5.0 watts to 17.0 watts (up to 800 to 2400 lumens)

Electrical

  • Universal 120-277V, 50/60 Hz input
  • Charge/Power “ON” LED indicator light and push-to-test switch for mandated code compliance testing
  • Output short/overcurrent protection: Electronic limiting, with normal operation resuming upon removal of fault
  • Output classification: Class 2 Compliant
  • Surge protection: Per C62.41 (TVS) Input overcurrent protection: Fusible link
  • Maintenance-free, long life, sealed Nickel Cadmium battery
  • Maximum battery recharge time: 24 hours